The paper type set for the document differs from the type of the paper in the indicated tray. Press to begin printing, or press to cancel the job. The paper size set for the document differs from the size of the paper in the indicated tray. If you need to use the exposure glass, turn off, , or under copy settings, and then try again. Use the ADF, even when copying a single sheet. See System Settings.Ģ-in-1, 4-in-1, or 2-sided copy could not be performed because the originals were not placed in the ADF. Specify the A4, Letter, or Legal size paper for the tray selected for printing copies. Set the machine to print copies using the A4, Letter, or Legal size paper in the setting. See System Settings.Ģ-in-1 or 4-in-1 copy could not be performed because the tray does not contain the valid size paper, which are A4, Letter, or Legal size. Specify the A4 or Letter size paper for the tray selected for printing copies. Set the machine to print copies using the A4 or Letter size paper in the setting. ID card copy could not be performed because the tray does not contain the valid size paper, which are A4 or Letter size. Specify a setting other than for the setting. See System Settings.Ģ-sided copy could not be performed because paper is set to be fed from the bypass tray. Specify the A4, B5, Letter, Legal, Executive, 8" × 13", 8 1/ 2" × 13", Folio, or 16K size for the tray selected for printing copies. Specify the tray containing the A4, B5, Letter, Legal, or Executive size paper (other than the bypass tray) in the setting. See Placing Originals.Ģ-sided copy could not be performed because the tray does not contain the valid size paper, which are A4, B5, Letter, Legal, Executive, 8" × 13", 8 1/ 2" × 13", Folio, or 16K. See Removing Scanning Jams.Ĭheck the originals are suitable for scanning. Remove jammed originals, and then place them again. Ask the sender to resend the document in parts as several smaller individual faxes, or to send at a lower resolution.Īn original has been jammed inside the ADF. See Removing Printing Jams.Ī print cartridge was empty. Load valid size paper in the tray, and configure the paper size settings under accordingly.Ī cover or tray was open. The tray set for under did not contain A4, Letter, or Legal size paper. The machine was not able to print the received fax, or the machine's memory reached capacity while receiving a fax because the document was too large. "X" indicates the parts of the messages that appear differently depending on a specific situation, such as the paper sizes or types, tray names, or toner colors. Messages are listed in alphabetical order in the table below. This section describes the meaning of messages that appear on the screen and what to do when a particular message appears.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |